Ford A and AA parts manual 1931 Language: French The inside of the book is in good condition or its age with little wear and has102 pages.The cover is rather dirty. There are no notes made and no loose pages. Was printed for Belgium and Luxemburg. Fixed price € 30. Shipping costs for the buyer. Keywords: parts list, teilecatalog, parts li..
Original 1932,33,34 Ford Stainless Steel clad trunk or rumble lid handle. It can be used in either application.If for a trunk the handle must be shortened.Includes 2 working keys.Chrome slightly worn on the barrel which is of brass.I did a light polish to remove some deep scratches on the stainless handle.Excellent condition and ready to install..
An original early oil or petrol can for a Ford car. Front and back are both embossed with FORD script. It is 6 inches square and 8 inches tall excluding handle and cap. In very good condition, not tested if it holds fluid. Buyer pays shipping cost.
ENV manual gearbox casing for Invicta. Original casting with "Invicta" on side. Crosstube bosses both undamaged. The bellhousing has cracked and been welded - but will need redoing before this can be used. Can either be repaired or new bellhousing section used to replace existing - which I have done. This is a crisp origin..
I´m looking for a cone clutch only or with a gearbox for a vinot engine from circa 1906-09.Any cone clutch is interesting. I´m also looking for chain drive chassi and/or parts for it.
For sale a V-belt pre-war motorcycle or car, in original. Shipping worldwide at cost and PayPal accepted.4/8 inches or 2/4 inches; 12mm-13mm; 2.5 meters length = 139 euros; mostly for 74ccm to 118ccm or mostly for auxiliary bicycles; Alternators; Water pumps5/8 inches; 15mm-16mm; 2.5 meters length = 149 euros; mostly for around 200..
For sale a V-belt pre-war motorcycle or car, in original. Shipping worldwide at cost and PayPal accepted.4/8 inches or 2/4 inches; 12mm-13mm; 2.5 meters length = 139 euros; mostly for 74ccm to 118ccm or mostly for auxiliary bicycles; Alternators; Water pumps5/8 inches; 15mm-16mm; 2.5 meters length = 149 euros; mostly for around 200..
Here is an original, round tube, brass radiator. It has the Ford script and the Made in USA on the front as well as what looks to be an original Ford Motor Company tag on the rear of the top tank. This is an old radiator that has it share of old repairs and bruises. It looks decent and displays well. This would not be recommended for a "driver" car..