Les annonces; à vendre toutes voitures pre-war

This Marshall Supercharger was mounted on a Amilcar CGS Engine. 

Very good condition vintage Smiths oil pressure gauge, reads up to 60 psi. Outer Diameter 61/2 cms.  Euros 200.

A nice original Derby Bentley ammeter. It is in very nice original condition with the original thick bevelled glass still in place. It appears to work as it should. I accept PayPal and will post worldwide at cost. 

A rare Alvis Speed 20 or Speed 25 Smiths oil pressure gauge. It measures 2 1/2” in diameter as opposed to the more common version which measure 2” in diameter. It is in fair unrestored condition and works as it should. I accept PayPal and will post worldwide at cost. 

Amilcar parts for CGS/CGSS Bracket for brake- and clutchpedals. Mentioned partnumbers: 30297, 30287 and CG325 with 1 shaft on which 2 attachments: 1 for the brakepedal  and 1 for the clutchpedal  Separate pedal. Partnumber: xx327 Requires work but quite rapairable.  € 65 exclusive transport  

A carrier and housing for the rear main crankshaft bearing for an Amilcar G-Type engine. This came from a CGS engine and is also suitable for a CGSs.The parts are in generally good condition, though the bearing housing does have one broken lug, which is a reasonably easy thing to repair. The bearing carrier will naturally require re-metalling and s..

AMILCAR AXLE BEAM 52CMS BETWEEN SPRING PAD  CENTERS, THESE HAVE OFTEN BEEN USED ON BRESCIAS, COMES WITH WELDED DONOR AXLE FOR BRAKES AND PARTS. CAN BE DELIVERED TO VRM MONTLHERY.

Jaeger amperes gauge Diameter 52 mm Bezel with the ribbed lines